Almost ThereCycling, Bikes, Parts, Accessories, Clothing and More…

Brake Lever

Bike Brakes Buying Guide

Bike Brakes Guide Your bicycle's brakes are its main safety feature. They help control your speed and stop when you are ready to stop. There are many types of bike brakes for different applications. They all have advantages and disadvantages depending on use. There are brakes designed best for road bikes and some that work best on a mountain bike. There are different styles of rim brakes that apply stopping power to the rim and different types of hub brakes that apply stopping power to the hub area of your wheel. We'll break all of this down for you in a way that is as easy as possible to understand.

Brake

Brakes are the component of the braking system that actuate the brake pads and directly apply stopping power to either the rim or the hub of a bicycle wheel.

Brake pads

Brake pads are pressed to the rim or disc to apply stopping power. They are made of many different compounds for different applications. Each style of brake has a specific style of pad that will work properly with that brake. Some pads have cross compatibility and can be used for multiple platforms, mainly cantilever and V-brakes. It is important to check brake pad wear and alignment to ensure safe riding.

Brake levers

Brake levers actuate the caliper and are normally located on the handlebars. They are the rider interface with the braking system. There are two main types of levers: those intended for drop bars and those designed for flat bars. From there, there are levers designed to work with the different variations of the calipers and dual control levers that control braking and shifting. With dual control levers you have to determine the proper brake interface and shift interface.

Drop bar levers

Drop bar levers are ergonomic levers that mount to the front, curving section of a drop bar. They act as the main hand placement position on most road bikes. Drop levers are typically designed to work with center-pull or side-pull brakes. If you are using linear pull brakes with drop levers, you must use a lever that is designed to function with the increased mechanical advantage that linear pull brakes afford.

Flat bar levers

Flat bars have their own set of levers, typically called mountain bike levers or BMX levers. It is important to know which type of brake the lever will be used with. Center pull and side pull use one type of lever, while linear pull brakes need a special lever.

Aero levers

Aero levers are special levers that attach to the end of bull-horn-style handlebars for time trial or triathlon use. They typically attach to the inside of the handlebar with an expansion nut.

Rim brakes Rim brakes apply stopping power (friction) to your wheel's rim. Rim brakes are generally actuated with a cable which is pulled with a lever mounted on the bike's handlebars. There are a few different ways in which the cable attaches to the brake. Another way to classify brakes is by mounting style. Most brake types crossover, so defining them can become confusing.

Cable interface

The manner in which a cable connects with and actuates a brake and brings the pads to the rim is a key characteristic to consider when shopping for the proper brake.

Center pull

Center pull brakes have a split or "straddle cable" that connects to the two opposite brake arms and is pulled from the center to bring the pads to the rim.

Linear pull

Linear pull brakes use a cable stop to act as one anchor point, stopping the cable housing and anchoring the cable's end on the other brake arm. When the cable is pulled, the two arms are actuated and stopping power is applied to the rims.

Side pull

Side pull brakes have a single cable running down the side of the caliper and work similarly to linear pull in that the housing and cable work together to actuate the brake arms. The big difference between linear pull and side pull is that side pull calipers have both arms on both sides of the caliper and pivot around the anchor bolt.

Mounting style

The manner in which a rim bike brake is attached to a bicycle frame and the way that the brake functions is the other key defining characteristic.

Cantilever brake

Cantilevers are characterized by two separate brake arms that pivot around two separate bolts mounted into the frame on opposite sides of the wheel. The two styles are standard cantilevers with bent arms and a center pull straddle cable, and Shimano's patented V-brake style with straight arms and a linear pull cable.

V-brake

Shimano developed a straight arm cantilever that is actuated from a linear pulled cable. This system offers more mechanical advantage than traditional cantilevers requiring a brake lever that applies less advantage.

Caliper

A brake caliper mounts to the bicycle frame at a single, central point that also acts as a pivot point for the brake arms on both sides of the rim. Calipers can be actuated with a side pull or center pull.

• Single pivot: In single pivot caliper brakes, both brake arms pivot around a single, central point that also anchors the caliper to the bicycle.
• Dual pivot: Dual pivot brakes anchor and pivot around a central point with an additional pivot on one side that adds mechanical advantage. Dual pivot brakes are the norm in today's road cycling market and are generally lower profile and higher quality than single pivot brake calipers available today.

Hub Brakes Hub bike apply stopping power to your wheel's hub. Sometimes they are internal (drum and coaster brakes), and sometimes they are external (disc brakes). Internal hubs can be actuated via levers or by applying reverse torque on the crank arms. External hub brakes are generally actuated with a lever attached to the handlebars

Disc brakes

Disc bike brakes use a caliper attached to the bicycle's frame or fork that apply stopping power to a metal disc attached to the corresponding hub. Disc brakes do a much better job at dissipating heat than traditional rim braking and, because they don't interface with the rim, don't cause any rim wear. They have become extremely widespread in off-road bikes and with tandems for these reasons. The main things to consider when purchasing disc parts are whether the brake is hydraulic or mechanical, the disc rotor diameter and interface, and the caliper mounting interface. There are adapters that can be used to aid in cross-compatibility, but not all brakes work with all bikes.

Drum brakes

Drum brakes are actuated by a brake lever, generally mounted on the handlebars. The brake actuation presses brake pads against the inner wall of the hub shell. They are popular on tandems and motorized bikes. Since they are internal, they work well even in the worst weather conditions.

Coaster brakes

Coaster brakes work in a similar fashion to drum brakes. The large difference is actuation; while drum brakes are actuated via a brake lever, coasters function with a reverse pedaling motion. Pedaling backwards forces a brake cone to push the pads against the internal hub shell. Normal pedaling motion disengages the brake cane, allowing for normal pedaling. Coaster brakes are only installed on the rear wheel of a bicycle.

I Suggest Bike Wagon for bike parts.

About the Author

Jon Carter is an avid biker and enjoys writing about the subject.  If you need bike parts, then come check out bikewagon.com

Kawasaki KX20 Boy's Bicycle $141.04 Boy's bicycle features steel freestyle frame and alloy caliper front brake and brake leversCycle includes linear V-brake in rearKawasaki KX20 bicycle contains double-foot peg set and four-bolt stem system

Left Brake Lever Assembly $22.31 Left Brake Lever Assembly

Right Brake Lever $22.31 Right Brake Lever

Brake Lever $61.95 Yana Shiki Brake Lever Quality Billet Aluminum Polished And Anodized Black Custom Brake Lever . This is of the highest quality with perfect fit and finish.

Brake Lever Assembly $17.35 BrakeLever-BZ30993 BLADEZ Lever Brake with wire Includes brake lever, brake cable, and wire 2 pin connector Related Scooters And Parts: Gas Scooters Motorized Scooters Electric Scooters Ride On Cars

ARC Forged Brake Lever $34.95 The ARC Forged Brake Lever from Sunline Racing features: Forged flex brake lever with CNC machined pivot knee Precision flex pivot allows blades to move out of harms way under contact Clutch & brake levers are forged from 6061 T6 aluminum for strength & durability Adjustment bolt adjusts lever for brake sensitivity preference External pivot bolt with replaceable bushing for a silky smooth action Uses your stock brake master cyclinder pivot

Chrome Brake Lever Set $49.59 Full-size scooter, custom brake lever set. Fits many 50-250cc models. Mounting Hole Inner Diameter: 8mm

Right Disc Brake Lever $16.85 Right hand side disc brake lever, black finish. Hole Diameter: 8mm Overall Length: 6.7 inches

Brake Lever Set $19.83 Brake lever for QMB139, 4-stroke scooters. Overall Length: 5.9 inches (150mm) Inner Diameter: 6.8mm

Replacement Brake Lever $4.95 Parts Unlimited Replacement Brake Lever Quality alloy replacement levers are available in standard or power-lever style Each replacement lever is poly bagged with header card and labeled for easy identification Sold each

Roll-A-Click Brake Lever $98.99 CRG Roll-A-Click Brake Lever A truly on-the-fly position adjustable lever, designed for OEM-style master cylinders Miniature clicker lever controls a roller cam assembly, giving riders the ability to manipulate lever position while riding Brake fade can be tuned in with ease 6061 T-6 aluminum CNC-machined billet construction Available in standard and shorty length (1-1/4" shorter) with grey, black or gold hard-anodized finish For matching clutch lever Click Here

LE1 Series Brake Lever $89.99 Braking LE1 Series?Brake Lever Folding, adjustable levers available for OEM and Brembo master cylinders All parts machined from aluminum Black anodized regulator Also available for clutch lever

Folding Brake Lever $89.99 Braking Folding Brake Lever Folding levers prevent external forces from distorting or jamming brake or clutch controls The end lever can extend its length Aluminum CNC machined, billet construction Applications for various model bikes with Brembo master cylinders

Standard Brake Lever $10.99 MSR Racing Standard Brake Lever The difference between winning and losing is knowing when to put the brakes on and when to let it rip A Standard Brake Lever from MSR Racing will put you back at the front of the pack The same ergonomic design and bronze pivot bushing as the competition lever at a more economical price Forged aluminum construction allows levers to be bent back to original shape after a crash Brake and clutch levers sold separately

Front Brake Lever $5.45 Front Brake Lever for Qingqi QM50QT-B2 50cc 2-stroke scooters. Related Scooters And Accessories: Scooter Parts Gas Scooters Motorized Scooters Electric Scooters Toys

Left Brake Lever $17.85 Left Brake Lever for Vento Zip brand scooters. Shop the largest selection of scooter parts , gas scooters , electric scooters , and motorized scooters for sale.

Hydraulic Brake Lever Assembly $91.99 Magura Hydraulic Brake Lever Assembly The 225.2 universal hydraulic brake master cylinder replacement for 7/8" handle bars Alloy body master cylinder 13mm diameter piston nylon fluid reservoir Threaded for brake light switch (not included) M10x1 outlet thread Fits 7/8 in. handlebars Not threaded for mirror mounts Requires Brake Light Switch for street use Click Here to view Brake Light Switch

GP Brake Lever $98.99 PSR GP Brake Lever Give your street bike a whole new look and feel with Powestands Racing's GP Brake Lever. A smooth feel and folding design will keep it protected in the event of a crash. Forged aluminum, lightweight, precise fit and finish Folding design with spring loaded hinge for a less of a chance of breakage Adjustable length lever ends and a micro-adjuster to fine tune for proper ergonomics All levers are black, optional lever ends and micro adjusters available separately

Brake Lever and Perch Assembly $17.99 Bikemaster Brake Lever and Perch Assembly Did someone tip your bike over and bend or brake your lever assembly? Don't stress...BikeMaster has affordable replacements. These Universal Brake Lever Assemblies fit nearly any cable brake on Kawasaki KX, Suzuki RM and Yamaha YZ dirt bikes. Even if your current assembly is working fine it's always nice to have a spare to save a weekend or a day at the track. Available in polished aluminium or black finish Lightweight Affordable spare or replacement **Note: Universal fit for Kawasaki KX, Suzuki RM, and Yamaha YZ dirt bikes with cable front brakes

Maintenance Series Part 10 (CRG brake lever)